Languages and Scripting
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Program terminated with bus error

 
Highlighted
New Member

Program terminated with bus error

Hi
i have an executable which is throwing the core.
There were no code changes done as such. And the executable build with previous environment is working fine.
What i understood is there were some upgrades for Cobol and Unix.

When tried to debug with gbd, i get the following info
Core was generated by `scmqc'.
Program terminated with signal 10, Bus error.

warning: The shared libraries were not privately mapped; setting a
breakpoint in a shared library will not work until you rerun the program.


warning: Can't find file /opt/mqm/lib/libmqiz.sl referenced in dld_list.
#0 0xc00b27e4 in ?? () from /usr/lib/libpthread.1
(gdb) bt
#0 0xc00b27e4 in ?? () from /usr/lib/libpthread.1
Cannot access memory at address 0xc003c1d3

Can anyone please advice

Thanks
5 REPLIES 5
Highlighted
Acclaimed Contributor

Re: Program terminated with bus error

You can't debug a core file unless you are are the same system.
Otherwise you need to use the packcore command to copy over all of your shlibs. Then use unpackcore.
Highlighted
New Member

Re: Program terminated with bus error

Thank you..
Now i am able to debug.. And the problem looks to be when calling pthread_attr_init

Below is the core
#0 0xc00b27e4 in __pthread_attr_init_generic+0xf0No symbol "unwind_data" in current context.
() from /usr/lib/libpthread.1
(gdb) where
#0 0xc00b27e4 in __pthread_attr_init_generic+0xf0 () from /usr/lib/libpthread.1
#1 0xc00b26cc in __pthread_attr_init_system+0x14 () from /usr/lib/libpthread.1
#2 0x4c8b0 in pthread_attr_init (attr=0xc003c1d3) at /usr/include/sys/pthread.h:573
#3 0x57bb8 in Gensrv_MainLoop (ntsSrvFullLog=0x400010e0 "sc.mqs")
at /ccnmxhome/nmx/ccnmx/mb_ccnmx/bb/ibssc/v17_0/gensrv/src/gensrv_mloop.c:1298
#4 0x8e84 in main (argc=8, argv=0xa8ff55e4) at /ccnmxhome/nmx/ccnmx/mb_ccnmx/bb/ibssc/v17_0/mqs/src/scmqs_main.c:375
Acclaimed Contributor

Re: Program terminated with bus error

>And the problem looks to be when calling pthread_attr_init

Yes, attr=0xc003c1d3 is not aligned properly or it is a bad address.
Highlighted
New Member

Re: Program terminated with bus error

thank you very much.. Got the issue and fixed. There was a cobol upgrade and the problem started occuring after the upgrade. The variable attr was not initialised which is causing the problem
Highlighted
Acclaimed Contributor

Re: Program terminated with bus error

>thank you very much. Got the issue and fixed.

If you are happy with the answers you have gotten, please read the following about assigning points:
http://forums.itrc.hp.com/service/forums/helptips.do?#33