script involving bdf command

[John Guster]

Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 2097152 129256 1952672 6% /
/dev/vg03/lvol1 105775104 79229992 26368480 75% /devdata
/dev/devdatareplicate/lvol1
53018624 48677552 4311432 92% /devdatarep

how to get info of %used and its Mounted on in script? notice that /dev/devdatareplicate/lvol1 is one line, its' info is in another line while /dev/vg00/lvol3 has everything in one line. Thanks. JG

[James R. Ferguson]

Hi John:

Bill Hassell's 'bdfmegs' script addresses this issue and much more:

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1124262&admit=109447627+1201708805055+28353475

Regards!

...JRF...

[Sandman!]

bdf | awk '{if(NF==1) getline m;gsub(" +"," ",m);print $0m;m=""}'

Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 2097152 129256 1952672 6% /
/dev/vg03/lvol1 105775104 79229992 26368480 75% /devdata
/dev/devdatareplicate/lvol153018624 48677552 4311432 92% /devdatarep

[Sandman! · Accepted solution]

Minor update to my last post...so use the command posted below:

# bdf | awk '{if(NF==1) getline m;gsub(" +"," ",m);print $0" "m;m=""}'

[John Guster]

thanks for sharing the info.