msm765 controller

[ahmet_kz]

after had some probems with 765 controlller just reset. want to logging to controller via switch and assing a ip address to lan interface. I couldnt success to assign an ip adress.. Whats wrong do i ?,

services a 2

enable

config

interface ip lan

ip address 172.18.10.253/24

1- how can i save this and reach to web conf. page via browser.

SW-BB(msm765-application-A)# show ip
Interface          IP Address       Subnet Mask        MTU      MAC Address
----------------- ---------------  ---------------  --------  ------------------
Data tunnel       0.0.0.0          0.0.0.0              1436   3C:D9:2B:AE:47:7D
LAN port          0.0.0.0          0.0.0.0              1500   3C:D9:2B:AE:47:7D
Internet port     0.0.0.0          0.0.0.0              1500   3C:D9:2B:AE:47:7C
Bridge            172.18.10.253    255.255.255.0        1500   3C:D9:2B:AE:47:7D
Controller data > 0.0.0.0          0.0.0.0              1500   3C:D9:2B:AE:47:7D
VLAN vs on Inter> 0.0.0.0          0.0.0.0              1500   3C:D9:2B:AE:47:7C
VLAN vs on LAN p> 0.0.0.0          0.0.0.0              1500   3C:D9:2B:AE:47:7D

[Patrick R]

CLI(config-if-ip)# end

CLI(config)# end

CLI# quit

[cenk sasmaztin]

post solved ;)

[andrewnjue]

Hi all,

I am after some help get on how to configure Guest users account over internet port. My Scenario involves a cooperate network with several subnets/vlans configured. 

I am using a msm 765 on a 5412zl. My internet Port is E1 and is untagged on vlan 1000(ip 10.10.254.1). The problem am experiencing is that when i assign my internet port a a static ip 10.10.254.2 and assign a my internet port as my D'Gateway in can't still my controller to NAT my clients ip and forward their request to the firewall.

I Also having problems with clients acquiring dhcp address from the controller despite enabling dhcp server on Guest VSC and assigning relevant ip.

I have enabled client tunneling, authentication and accesscontrol on the vsc and also HTML based login.

I am happy to provide further information to facilitate further help.

Thank you.

Regards,

Andrew