add a hdd to e800 netserver

[St_8]

I have a e800 netserver with a netraid 1m card and 3 9Go hdd in raid 5.
I want to add a 18Go hdd in jbod.
I have installed it in the netserver and i can see it in "ready" state with netraid assistant.
What do I have to do to format it : I can't see any option in netraid assistant.
Sorry for my poor english and
Thank you.

[Terri Harris]

Since the 18 GB hard drive is connected to a RAID controller, it must be configured into a NetRAID array. With one hard drive there is only one option, which is to put it into a RAID 0. Create a new RAID 0. You will then have a RAID 5 and a RAID 0.

[St_8]

thank you, it works... I just did not find the wizard button...