Cluster LPR in Windows 2003

[Jaime Nascimento]

I want to know if the following cluster configuration is supported in windows 2003:

2 Netservers LPR III 700
Netraid 1si for internal storage
Netraid 3si for shared storage (Firm W.0.1.30)
1 RS12 D5989C

I found an article that say that this is supported in windows 2000, but I can´t find anything about Windows 2003.

Thanks

Jaime Nascimen

[kris rombauts]

Hello Jaime,

this configuration is not supported on w2k3.
The only official supported Netservers from HP on w2k3 are the TCxxx series, none of the older servers are supported.
The Netserver productline came to his end after the merger and now the Proliant productline is the one going forward.

Have a look here,(however the older LPr isn't in their anymore either) :

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14552&locale=en_US&taskId=135&prodSeriesId=74580&prodTypeId=15351

HTH

regards, Kris