cluster on tc4100

[ziad_1]

Hi all ;
I have two servers 4100 , in one server I have netraid card 2M and the other 1SI and I want to configure them cluster wise .is this supported to have two different netraid card in cluster configuration.thanks

[Greg Carlson]

Ziad,

When you are in a cluster configuration you need to have the same cards with cluster fw. The NetRaid 1si does not have cluster support. The NetRaid 2M and 1si will function with each other in the same server but need to be at the latest fw. You can find the fw and drivers for both cards here: http://productfinder.support.hp.com/tps/ProductFinder?h_lang=en&h_tool=software&h_query=netraid

Ciao,
Greg

[C.I.S]

Hi I use the netraid 1SI and not 2M for the shared bus .and for the internal disk (OS) the netraid 1M .is it supported ?? thanks in advance . the problem is that the two server in a ramdom time give blue screen and the the message is hardware malfunction contact your vendor .