Configure Teaming

[Andrew J. Milbrath]

I have an HP LH3000r With 2 -D5013b-10/100TX NICs and Win2K-AS. I'm tring to setup the teaming but I don't see the Pro Set icon in ctrl panel. I have the NIC's setup using the latest driver version 5.40.17.0 - date 4/12/2001.

How do I get the Pro Set utility to install?

[Frank Libassi]

I would try the Intel web site http://support.intel.com/support/network/adapter/pro100/31351.htm and for there down load pro set.

Have fun

[Theo Hill_1]

Go to this link:

http://appsr.intel.com/scripts-df/Product_Filter.asp?ProductID=416

Select win2k, download #5. Read the readme for install instructions.

[Andrew J. Milbrath]

Frank, I tried your advice.

I was able to get the ProSetII Icon in the control panel however when I went to team the nics the only option I received was to remove the nics.

I did attempt to remove and reinstall. Again the only option was to remove the nic using the prosetII.

The drivers were upgraded from v5.40. to 6.1.3.0

[Terri Harris]

I have a zip file which should work. However, it is too large to attach here (>1MB). Do you have an email address I can use?
Note: You can send your reply to:

NetSrvTech_Support@hp.com

if you prefer. This is the email address for HP Netserver Support.

- Terri