Enter the Netserver Lh Pro Bios

[Leroux_2]

Hello,
I recovered a Hp Netserver Lh Pro but i don't know how to enter the bios.
Must I push a specific key on the keyboard at the startup ?
The server can't boot on a floppy disk or a Cd-rom.

Please Help

[Greg Carlson]

To access the Bios/ECU you need the ECU (Eisa Config Utility) diskette. You can create one here. http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50454en_US.html

Why can't you boot the floppy? Default boot should be cd, floppy, hdd. If you don't have defaults set up, then with power off, turn switch 3 config valid to the off position. Then power on until the config is clear. Then you will be able to boot to floppy and save your config.

Ciao,
Greg

[Gordon Owens]

You have to use a Floppy or CD-Rom to acess teh BIOS utility. It can be downloaded from HP's website.