HP NetServer E60 Processors?

[Christopher S. Penn]

What processor(s) can I install into a NetServer E60? Currently it's got a Pentium II 450 MHz in it, and I'd like to shop around on eBay for an upgrade. What's the highest I can take this server?

Thanks!

Chris

[Sanjay_6]

Hi Christopher,

Take a look at the thread below,

http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=partlist&model=E60+PII%2F400&modname=NetServer+PII%2F400+E60&template=secondary&plist_sval=Processor&plist_styp=subcat&keysel=Processor&catsel=%3F&ptypsel=%3F&strsrch=

Hope this helps.

Regds

[Theo Hill_1]

PIII-550 is the fastest.

[Don Reese]

The highest speed shipped was the PIII 650Mghz, however, you can install up to a PIII 700Mghz in the E60.

[David Naramore]

I am a former employee of the netserver engineering department of Celestica of TN. I was so used to working with the HP netservers, that after I left, I picked up a used unit from a company that bought a bunch of scrap units when the company closed it's doors.
My e60 D9125T's motherboard states that it can handle a PII 400 & 450 or a PIII 500, 550 & 600mhz.

Also, the following link shows e60's processors rated the same.
http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=famlist&secfam=CSO|NetServers

The PIII Katmai processors only went up to 600mhz. I could be wrong, but have never heard of a Katmai that was larger... it was replaced with the PIII Xeon. I was told the Xeon will not work in these units.

[John Meisell]

How about the slowest... I've got a pair of pII-350..?

[Theo Hill_1]

The slowest is a PII-400.