lc 2000 with netraid controller

[Mike Willour]

New Unix server just installed with the following error message or warning

HP NetRAID[Info] : SAF-TE Information: Adapter 0 Channel 0 Target 5 [Fans=0,Power Supplies=0,Slots=6 Temperature Sensors=0]

any idea if anything is broke ?
where can I search for helpful suggestions ?
thanks

[Greg Carlson]

Mike,

Where are you seeing this error..

Also have you tried to clear CMOS and flash the Bios and fw on your server yet?

The Bios for your server for U2 or U3 models is at:
http://productfinder.support.hp.com/tps/ProductFinder?h_returntext=Return+to+Drivers+and+Downloads+Search&h_returnurl=http%3A%2F%2Fwww.hp.com%2Fsupport%2Fsoftware&h_tool=software&h_query=lc+2000

The fw for your NetRaid 1m,2m,1si,3si is at:
http://productfinder.support.hp.com/tps/ProductFinder?h_returntext=Return+to+Drivers+and+Downloads+Search&h_returnurl=http%3A%2F%2Fwww.hp.com%2Fsupport%2Fsoftware&h_tool=software&h_query=netraid

Ciao,
Greg

[Stuart Browne]

Umm.. that doesn't look like an error to me.. Looks like the 'amirdmon' stuff has started, and found the controller *shrug*

[Christian Schmidt]

Hi,

I have installed some SCO-Unix Servers LC2000 with net-raid 1M . This message arrives on all Servers with the new amird Driver 2.13.
I think this means everything O.K.

Errors are in the format: HP Netraid Warning: OPDRV 0:1 state changed from online to failed
- also in /usr/adm/syslog

[Marino Meloni_1 · Accepted solution]

hi
the message is issued by the SAF-TE, on adapter 0 channel 0 target 5 indicating the netraid, first channel and the hotswap cage, (processor is id 5)
signal is information.
so nothing broken

bye

marino

[Marino Meloni_1]

i forgot to mention it but the SAF-TE is the managment processor located on the backplane ho the hotswapp hdd cage.

bye
marino

[Mike Willour]

Is there a way to manage the info from NetRaid? I am seeing the message practically every day and if there is a way to either stop the message and or control this message and retrieve other information that would be a good thing for me knwo know.

[Marino Meloni_1]

hi
you can install IstantToptools, it is a program installed localy that can manage the messages sent by the managment controller of the server. this software can show you in a grafical way all the events sent by the server localy.(this software have internaly a http server and you can connect on this machine by your workstation typing in your web brouser the ip adress of the server and the port 280 es: 192.168.1.10:280)

another step is to install a console managment called TopToolsDeviceManagment, but this is more heavy and need a dedicate pc to manage all your devices connected in your lan.

bye

marino