HPE Community
Netservers
1857310 Members
3482 Online
110372 Solutions
New Discussion

LC2000 NIC question

 
Craig_14
New Member

‎11-09-2001 02:02 PM

‎11-09-2001 02:02 PM

LC2000 NIC question

I have a site with a LC2000 connected to a Cisco 2900 switch. Only the activity indicator lights in the NIC card diagnostic. I get no response from the 100mb indicator , the Duplex indicator or the link indicator. The unit will connect to the switch and see other machines on the network but at times becomes very slow (network response). I have tried to force the card to all combinations, 100/full , 100 / half , 10 / full and 10 / half. with no change in performance. I have also forced the switch to the same speed as the LC2000. Any ideas??
Thanks
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.