LC2000

[Matteo Feliciani]

My Lc2000 immediatly stops when I switch on.
The server emits the beep code 1-3-3-1.
I tried to change the DRAM with a working one but nothing change.
What else can i try?
Inside the server i can see 8 leds, 2 of that remains light. Somebody know a link to understand what does they mean?

[e4services]

That is a DRAM Test Failure per the Beep Code. Try a deferent DRAM slot since you already swapped out the DRAM itself.
Try removing and reinserting everything, CPU, VRM, PCI cards etc.

[Sean T. Craig · Accepted solution]

Hi Matteo,

Yes, this is a RAM failure. This is the same code you get when there's no RAM in the server. Make sure you have the correct supported RAM for this server and try a single stick in one slot and then another. If you are sure the RAM works and it is supported in this server, but still doesn't work, then the system board will need to be replaced.

Hope this helps,

Sean T. Craig Sr. C.E.T., M.C.P.