LHII

[STUART_7]

LOST ALL THE MATERIAL ON MY HP LHII SERVER
WHEN WE MOVED
SCSIS ARE NOT BOOTING UP AND THE BIOS IS SET FOR THEM FIRST..
IT ALSO WONT BOOT THROUGH THE FLOPPY OR CD ROM
HOW DO I GET INTO THE BIOS FROM BOOTUP
YOUR WISDOM WOULD BE MUCH APPRECIATED
THANX

[Edward Winter]

To get into the BIOS on the older EISA based NetServers you need to boot the ECU (EISA Config Utility).

You can get the latest version from http://www.hp.com/cposupport/swindexes/hpnetserve4476_swen.html
but it sounds like this may not help you if you cannot boot from the FDD.

What happens when you power the server up i.e. lights, beeps, messages etc?

[Theo Hill_1]

Try clearing the CMOS if the server doesn't boot from anything. You will need to boot to the ECU afterwards, so make sure you have that available.