LT6000R U3 NETRAID Question

[slyandjen]

When I went into the SCSI Utility (ctrl -m)
and I saw that I have SCSI-3 options in the settings. DO I have the 3Si SCSI raid in there?
IS there a way to disable Channel 1 instead of scanning all of the channel at bootup?
How do I disable the press any key to continue message at the startup

[Hans-Jürgen Lange]

Hello,

I have a LH6000R U3 and there you decide in the BIOS which channel is RAID and which is Standard SCSI-3.
Because I only use the RAID controller I'am not really familiar with the rest. But my LH4 starts a different SCSI BIOS if one of the Channels is not controlled by the raid controller. And there it should be possible to disable the channel.
Only if the configuration of the RAID controller and the real disk configuration are different this message appears. So, change the RAID configuration for your needs.
More help could be given if you would tell us the complete message. There must be more information why it stops booting. A missing disk, a disk that has roamed, moved to another slot, or something like that.