Multiprocessor mode is not working...

[Antony Durocher]

I use a Hp LH-II Netserver running with 2 intel PentiumII-300Mhz. It can't be run as multiprocessor neither at startup (bios) or as Nt4 or Netware server. I get the following message at bootup: "Missing Bios Update Data Bloc for Cpu while I'm using latest bios and Ecu. What can I do.
Thank you.

[Krzysztof Marczak]

What Multiprocessing specification you use. Should be a MP 1.4 for Windows. You can check and change in BIOS->Configure computer->Run Configuration Utility->Advanced EISA Configuration->View or Edit Details->EISA NMI Control->MP Specification.
What BIOS version you have. The newest is 4.05.20

[Antony Durocher]

I already use MP v1.4 and bios 4.05.20

[Diana Thompson]

Try clearing the CMOS, flash the bios again, then go into the ECU and see if it see's 2 processors.

Diana
NSD Support

[Antony Durocher]

I have already done that too !!!