Netservers
1845946 Members
3067 Online
110250 Solutions
New Discussion

NetRaid Controller and NetServer Storage System/6

 
Jeff Reinhardt
New Member

NetRaid Controller and NetServer Storage System/6

I have a NetRaid Controller and NetServer Storage System/6 and have a couple questions:

1.) Can these be installed and configured on a non-HP machine?

2.) What is the largest drive the System/6 can take?

4 REPLIES 4
Theo Hill_1
Honored Contributor

Re: NetRaid Controller and NetServer Storage System/6

1.) You can try, but you won't get support from HP.

2.) D5039A 18.2GB 7200RPM UW
Jeff Reinhardt
New Member

Re: NetRaid Controller and NetServer Storage System/6

Ok, I have 5 IBM 18.2 GB drives installed in the machine, and the NetRaid installed in a system. They are connected with the correct cable, but the NetRaid does not detect and of the drives. Any suggestions?
Theo Hill_1
Honored Contributor

Re: NetRaid Controller and NetServer Storage System/6

Which netraid controller? Try one HDD at a time to see if one of the HDD isn't causing a problem. Try another channel on the netraid controller if there is one. Is the firmware up to date on the controller?
Marino Meloni_1
Honored Contributor

Re: NetRaid Controller and NetServer Storage System/6

Jeff,

SS6 is a fast and wide SCSI2 enclosure, slow down the SCSI speed on your controller and you will found the disks (I hope)

marino