netserver e60 nort booting

[Efrem Pannell]

I received an old e60 from my company becuase they decided to replace it with a new server. The IT person informed me that he was having a prblem gettng the server to boot up , so they decided to replace it. The PC doesn't power at all. Where can i get part numbers for replacement parts?? I want to invest in a new motherboard and power supply. Any information would be helpful.

[Marino Meloni_1]

hi
here is the link where you can found any part number of any product in HP

http://partsurfer.hp.com

bye

marino

[John Rogers_2]

Hi
I bought an LH3 Netserver and the navigator CD supplied was for an E60 netserver. You will need this CD to configure your server. Should you be able to obtain a Navigator CD for an LH3 Netserver, we should be able to do a swap. Then you will be able to re-confugure your E60 once you have replaced any faulty parts and the server should then boot.

[Helen French]

Hi,

Try this for a complete list of products and PN which supports Netserver E60:

http://netserver.hp.com/support/parts_service/parts_list/parts_tpl.asp?pid=E60

HTH,
Shiju

[Terri Harris]

Referring need for Navigator Cd:

The Navigator CD is not required to configure a NetServer. The only thing which cannot be done without the Navigator is to create a Utility partition.
Otherwise, all drivers and updates are on the HP web site.

Cheers! - Terri