HPE Community
Netservers
1857310 Members
5029 Online
110372 Solutions
New Discussion

NetServer LC2000 Reboot Hangs

 
John O'Connor_2
New Member

‎01-03-2003 02:47 AM

‎01-03-2003 02:47 AM

NetServer LC2000 Reboot Hangs

We have a number of LC2000 NetServers that were installed on different sites at different times during 2001/2002. They run Windows NT4.0 Server and have been scheduled to Reboot at around 2:00am most days during the week using a Shutdown.exe. All works very very well most of the time. However, periodically (at different times) a server will fail to reboot. It will shutdown ok and start to come back up again but will hang during this process. The only way around this is to power cycle the server. This happens on all the servers at varing times. Any ideas greatly received.
0 Kudos
2 REPLIES 2
Eugeny Brychkov
Honored Contributor

‎01-03-2003 03:34 AM

‎01-03-2003 03:34 AM

Re: NetServer LC2000 Reboot Hangs

John,
I'm concerned about bios version of your servers. What's current version? Please post it here and we'll think further
Eugeny
0 Kudos
Theo Hill_1
Honored Contributor

‎01-08-2003 03:51 PM

‎01-08-2003 03:51 PM

Re: NetServer LC2000 Reboot Hangs

also, if these lc2000's are connected to a KVM swotch, make sure the KVM firmware is up to date.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.