Netserver LD Pro giving boot error

[reji_3]

Hai all

I am having a HP NETSERVER LD Pro ,THE BATTERY GOT REPLACED AND AFTER THAT IT IS NOT BOOTING TO WINDOWS NT4.0, IT GIVES THE ERROR CONFIGURATION CURRUPTED F1 TO CONTINUE.,NTLDR MISSING.CAN ANYBODY GIVE A SOLUTION FOR MY PBLM
REGARDS
RM

[Sung Oh]

Hi,

Here is support info from MicroSoft
http://support.microsoft.com/?kbid=318728

Regards,
Sung

[reji_3]

HAI,
I WANTED TO CHECK THE BOOT SEQUECE,BUT
I DON'T KNOW WHICH KEY I HAVE TO PRESS
TO ENTER INTO BIOS.
i WANT TO CLEAR THE CMOS ALSO . CAN ANYBODY TELL THE PROCEDURE PLSE.

[Sean T. Craig · Accepted solution]

Hi Reji,

First thing you want to do is look inside the server for an EISA Configuration Utility (ECU) Disk. It will probably be in an ESD sleeve. If you don't have one, you can download it here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=50440&prodNameId=15524&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=ns1014en

Run the executable and it will create a bootable floppy disk. Boot to the diskette and save changes. Take the disk out and boot normally.

Let us know how that goes,

Sean T. Craig Sr. C.E.T., M.C.P.

[reji_3]

Hai can anybody tell how to execcute and change the settings of server through EISA Utility

[reji_3]

HAI,

I AM HAVING A 10GB IDE HDD AND 9GBUWSCSI
HDD IN THE SERVER .I WANTED TO TO BOOT THE SERVER FROM SCSI HDDWHERE MY WINNT O.S IS INSTALLED.
CAN ANYBODY HELP ME TO CONFIGURE THE BOOT PRIORITY IN BIOS IDE HDD FIRST ,SCSI HDD SECOND.

REGARDS

REJI