Netserver lh3r Processor Upgrade

[Joseph Campbell]

I recently inquired about a processor upgrade for these machines and was told that I can go from the PII 400 and 450 to PII 600's but that it required a fan upgrade... does any one know the part number for that fan upgrade? I wrote it down but as usual the scrap of paper it was on is now gone. THANKS,
Joe Campbell

[Alicia White]

I believe you are talking about the optional fan that is mounted on the processor board next to the CPUs. You can see a diagram of the part here:

http://partsurfer.hp.com/cgi-bin/spi/quickpic?model=LH3+PII/450&picture=NSLH3/2

The part number is: 5064-3531

Alicia

[Joseph Campbell]

This is the fan part number for the PII400-450, (And now that I am looking at my original message, I typoed it.) you can upgrade these to PIII 550-600, but according to HP there is a Fan assembly (PN D something or other) that is ALSO required when you do the upgrade. That fan assembly is what I am interested in. The one you have listed here is for the PII series.

Thanks for your help, but I think I am still looking.

Joe

[Jorge Pons]

Hi Joe

The Part number of the fan you need is: D8595A

You can see at:
http://partsurfer.hp.com/cgi-bin/spi/quickpic?model=LH3+PIII/600&picture=NSLH3/2

Regards

Jorge