HPE Community
Netservers
1847172 Members
5526 Online
110263 Solutions
New Discussion

Re: netserver LHii

 
alex green_1
New Member

‎05-27-2003 03:13 AM

‎05-27-2003 03:13 AM

netserver LHii

I am having problems getting the bios to boot from an IDE drive with a raid array with the data on. I cannot get it to boot regardless of what I do to it. I have to retain the data on the raid array though.

any Ideas

Alex
if it ain't broke, tweak it
0 Kudos
1 REPLY 1
e4services
Honored Contributor

‎05-28-2003 03:28 AM

‎05-28-2003 03:28 AM

Re: netserver LHii

Alex,
This is by design it has been said. The IDE controller on Netservers was, supposedly, not designed to support hard drives. So this is why there is no selection for inclusion in the boot strap.
You CAN however add an inexpensive IDE controller or even a Promise IDE RAID Controller to add mirroring support, if you wish.
Hot Swap Hard Drives
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.