NETSERVER LP 1000R Data Sheet

[shwebk]

Hi

I was trying to obtain a data sheet for this netserver: NETSERVER LP 1000R I was able to find a data sheet for NETSERVER LP 2000R, but I need it for the 1000R. Can someone please direct me to the proper resource for this information.

Thanks

Shoaib

[Bryan Eley]

Is this what you're looking for:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpn11464/lpn11464.pdf

Hope this helps,
Bryan

[Bryan Eley]

This was taken from this netserver link (in case you want more/other info):

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179911&taskId=115&prodTypeId=15351&prodSeriesId=50440

Bryan

[shwebk]

Thanks for all the info, the only thing is that the data sheet for 1000R has dimensions for the individual blade I think I need to know the dimensions and specs for the whole thing.

Thanks for all your help.

[Bryan Eley]

The user guide from the previous link has rack-mounting information starting I think on page 66, but I don't think it has the rack dimensions.

This link http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=tis12592&jumpid=reg_R1002_USEN
states that
"The HP Netserver LP 1000r and LP 2000r can be installed in hp racks and most 19" EIA standard 4 post racks with non-threaded holes that meet the requirements in the table below..." There's some information about
distance between left and right column center holes, distance between front and rear outside column face and distance between left and right column inner flanges (for both racks with threaded and non-threaded holes).

I don't know, but maybe there's some more information on this page regarding rack types that may be able to point you in the right direction.

Bryan