Nos Memory Dump

[william_161]

I get this message on the Service menu on the LC3000 Hp Server

NOS Memory Dump : Halts the server! Enter sign to skip dump.

What could be wrong with it ? The system power up and all fan working but it has no display at all. Changed monitor problem still there, Would be gratefull if you guys can help me out here

[kris rombauts]

Hi William,

someone probably went into the front panel menu and scrolled down to the service menu and went to the manual initiate dump option, this is used for troubleshooting when i.e. the server hangs and we need a dump from the system to find out if the hang is caused by a hardware or a software problem.

Just exit out to the main menu again with the appropriate buttons.


However,if this message appears after you power off/on the server then their is something broken and you would need to call HP for support.


HTH

Kris

[william_161]

There was two fault that i found, First the memory was faulty and i also changed the control panel to see the error logs. As the current control panel would not allow me to entre the error log