Problem in E-800/SCO5.0.5

[Amit_6]

we have sco 5.0.5 Enterprise on E-800/with Adptec 2100S Raid Controller/Iwill (Advansys chipset) 2936UW-e controoler fr tape/spooler and Specilaix IO8+ (pci) - two cards for 16 port.

we are getting the following message
istat=02: LSS_PAR sist0=01 sist1=00 !!!

and the system hangs. this mesagge appears randomly i.e after 2 hours of working or in the evening time


we are getting this message when HDD were on interlan Smybiosis controllers

what is the
a)solution
b) cause of this problem

[Pen Smith]

Try going to the SCO site and getting TA#110511; it refers to SCODoctor and Symbios SCSI driver incompatibility problems. We had the message on our LH3 and I have not gotten anyone at SCO or HP to elaborate beyond SCO's solution: "disable Doctor"!! or replaceAdapters/drivers. If you get more info or answers let me know. Thanks

[Pen Smith]

Amit, due to the Caldera aquisition of SCO, you may have trouble accessing the site and info I mentioned; here is an attachment of the old SCO Technical Article #110511. Please let me know if anything comes of this. Pen