Problem with NetServer LH2

[kokila]

Hi ,

There is a serious problem in the netserver given below :

Hp Net Server LH 2
Model No : D5017-60200

Problem Description :

Once it powered on no display is comming to the screen.After replacing a VGA adapter the problem remains.
Then I replaced the motherboard(with old flash bios rom) and the power supply but the problem still remains.
** I could not replace a new Flash bios because the replacement system board received with out the Flash bios.
Even when I remove the memories I cannot hear any beep sound.
When switched on After some time when I physically touch the processor I can feel that it doesn't get heated.
So I changed the processor also but the problem still remains.
Is the problem lays in
1) Flash Bios ?
2) VRM Module ?

Or something else ? Pls Help me to solve this problem.

Thank You ,
Kokila.

[Theo Hill_1]

It could be anything plugged into the main system board. If they are not seated correctly, then the system will not boot. Take the system down to a minimum, 1 proc, 1 vrm, 1 memory. no pci cards. If it doesn't sound like it is booting with no video, then it isn't booting. Systems will still boot if the video does not display, due to a bad video adapter.