Serial Port on Netserver LD Pro

[Bill Coghill]

I recently purchased a second hand NetServer LD Pro 180, but am unable to find a way to enable the second serial port or the Parallel port. Do I require a utility to do this as the usual methods won't get me into edit the bios setup.
Thanks,
Bill

[Paul R. Dittrich]

You may find these URL's useful:

http://www.hp.com/cposupport/servers/software/ldpecu.exe.html

http://www.hp.com/cposupport/servers/software/ldpbios.exe.html

http://www.hp.com/cgi-bin/cposupport
/swindex.pl?p=hpdiagnost5450&l=en&c=Utility

HTH,
Paul

[Marino Meloni_1]

Hy


The LDPro is a EISA architecture server, so for changing bios configurtion you need to run the ECU (Eisa Configuration Utility) that you can found with the server or on the hp site http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=nsldp&l=en&c=BIOS

bye

marino