about link aggregation

[rodtor]

Hello, I have a question about link-aggregation. I am using a translator because I am not good at English.

interface GE0/0/0

port link-mode

port link-aggregation group 1

interface GE0/0/1

port link-mode

port link-aggregation group 1

quit

interface route-aggragtion 1

ip address <ip address>

quit

I wonder if the ports in groups can be active or standby when I set them up like this.

And I wonder how many link aggregation groups are possible.

Thank you : )

감사합니다. 

[akg7 · Accepted solution]

Hello,

Number of groups creaton depends on devices. One interface can be a member of one group only.

Which device you are using, please share name and product number 'JXXXXX'?

It seem you are creating route aggregation.

You can check the status by using below commands:

For Route Aggregation: Layer 3

display link-aggregation verbose Route-Aggregation

For Bridge Aggregation: Layer 2

display link-aggregation verbose Bridge-Aggregation 

Thanks!

[rodtor]

Oh, I'm sorry. The equipment I'm using is the hp 6616 router.

[rodtor]

I also wonder how many ports you can set up in a group.

[akg7]

Hello,

Maximum 8 interfaces in a group for aggregation.

Thanks!

[akg7]

Hello,

Link aggregation group number can be taken in between <1-1032>.

Thanks!