Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1849863
Members
1909
Online
104045
Solutions
Latest Articles and Discussions
HP53xx and Cisco6500 ip routing again
Posted to: Switches, Hubs, and Modems
01-19-2003 Oops, my picture didn't translate very well on my post. Here is something simpler. :-HP1->10.0<-C6500->20.0<-HP2 HP1->30.0<-C6500-2->40.0<-HP2HP1->50.0/24<-HP2Thank ...
0
Kudos
1009
Views
0
Replies
HP53xx and Cisco 6500 ip routing
Posted to: Switches, Hubs, and Modems
01-19-2003 I have not been able to find enough info in the manual on the 53xx to figure this out and I've exhausted my searches on the net. Need help in configuring this scenario....IPs are examples only ( ...
0
Kudos
2124
Views
7
Replies
wl510 serial interface
Posted to: Communications and Wireless
01-19-2003 how can I access the wl510 access point with the rc232c interface.
0
Kudos
338
Views
1
Reply
wireless bridge help
Posted to: Communications and Wireless
01-18-2003 I have a wireless network in my house. I have a SMC wireless router connected to my cable modem and 2 machines hard wired to it (I know drawings work better but I can???t do that right now). They ...
0
Kudos
437
Views
2
Replies
Octets threshold?
Posted to: Switches, Hubs, and Modems
01-17-2003 What are octets thresholds used for?I've got a switch that is reporting this critical alert:Crossed Octets threshold for segment: 10.10.10.10_port_8_(shared)What does crossing an octets threshold ...
0
Kudos
1948
Views
3
Replies
compaq sw5450 is incoherent
Posted to: Switches, Hubs, and Modems
01-17-2003 I just bought a compaq sw5450 switch. When I power it on, the power led glows green, but the mgmt led glows orange. None of the 48 ports will show a link when a working computer is plugged in. ...
0
Kudos
1051
Views
0
Replies
