Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1848609
Members
6534
Online
104033
Solutions
Latest Articles and Discussions
WL 410 reset
Posted to: Communications and Wireless
12-04-2002 During an attempt at resetting the AP, holding in the reload button only displays one amber light rather than cycling through all colors.Any recommendations?
0
Kudos
384
Views
1
Reply
4108gl problems with print servers...
Posted to: Switches, Hubs, and Modems
12-03-2002 I'm having a strange problem with some of my print servers after installing two 4108gl switches. For the past few weeks about a dozen Lantronix EPS and one JetDirect print server (all running at ...
0
Kudos
954
Views
1
Reply
Wl110 and WEP Problems under XP professional
Posted to: Communications and Wireless
12-02-2002 I have a WL110 PC-Card and when I try to connect via WEP encryption to an access point, some funtions do not work. For example I can't send emails but recieve emails if WEP (either with 64bit or ...
0
Kudos
469
Views
4
Replies
HP4000M flooding unicast traffic
Posted to: Switches, Hubs, and Modems
12-02-2002 I have been battling an ongoing intermittantproblem with the HP4000M switches where every few minutes we get ALL unicast traffic flooded on every active port.We have the latest version of the fir ...
0
Kudos
5359
Views
13
Replies
To route or not?
Posted to: Switches, Hubs, and Modems
12-02-2002 Small k12 school district, about 1200 nodes, all schools connected to central office via fiber. Currently using 4108 in central office, 4000M's as the "main" switch in each school. All internet t ...
0
Kudos
1197
Views
6
Replies
Console access while using MRTG
Posted to: Switches, Hubs, and Modems
12-02-2002 I recently started running MRTG to collect SNMP data from my Procurve 4000m and 2424m switches. It is working fine, doing everything I need it to do.However, now that I have MRTG running to pull ...
0
Kudos
1782
Views
5
Replies