Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1847672
Members
3889
Online
110265
Solutions
Latest Articles and Discussions
Cisco - Catalyst 2900MF XL
Posted to: Switches, Hubs, and Modems
10-07-2002 Hi all,I wonder whether Catalyst 2900MF XL can work with single mode in 100BaseFX ports (Cisco doc contains declaration of only MM) and if so, how much distance it can extend between the neigbors ...
0
Kudos
1567
Views
3
Replies
Welcome
Posted to: Communications and Wireless
10-07-2002 Let me have the privilege to open first thread.and welcome you all.I see wireless LAN with 11 Mbps is slower than 2mbps leased line , why ?regards,U.SivaKumar
0
Kudos
829
Views
2
Replies
WL410
Posted to: Communications and Wireless
10-01-2002 Can I link two WL410 together one with lan and one with no lan. Just too expand range. Can I i any put in a RJ45 with some kind off jumpings.
0
Kudos
319
Views
0
Replies
WL200 was working now it is not? any ideas??
Posted to: Communications and Wireless
09-05-2002 Laptop: Compaq Evo N1000V Wireless: Internal W200 Adapter Access Point: Orinoco AP-2000 Access point I received the laptop new and configured it without the internal wireless nic. Once everythin ...
0
Kudos
365
Views
0
Replies
Dual fabric and zoning
Posted to: Communications and Wireless
09-03-2002 I have two fabric's each has one SAN 16EL switch. I have a need for additonal ports on both fabrics and have only one more switch is it possible to connect each fabric via ISL to the third switc ...
0
Kudos
343
Views
0
Replies
Access to Rom Memory
Posted to: Communications and Wireless
08-25-2002 I was experimenting with the security of the access point and i block the access with only one Mac address. How can I reset the rom memory or have access to the Access Point to change this conf ...
0
Kudos
360
Views
0
Replies
