Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1869527
Members
2364
Online
110540
Solutions
Latest Articles and Discussions
HPE 5900 AF 10 gb ethernet connection to Dell S5212F using DAC ca ...
Posted to: Comware Based
11-04-2021 We are trying to connect a HPE 5900 AF to Dell S5212F switch at 10 gb using custom made DACs. Each DAC is labled HP side and Dell Side. The vendor that made them assures me they are 100 % Dell an ...
0
Kudos
2467
Views
3
Replies
IMC Compliance Policy
Posted to: IMC
11-03-2021 Trying to figure out how to write compliance policy for ip authorized-mangagers.I have done the regular expression to verify the ones I need exist but cannot figure out how to make sure there are ...
0
Kudos
2937
Views
3
Replies
Aruba 1930 on IMC 7.3
Posted to: IMC
11-03-2021 Hi, We are trying to set up some Aruba 1930 IO switches on our HP IMC server (E0605P06). So far the IMC has identified the swich and shows some basic info, but we don't see any SNMP commands work ...
0
Kudos
3289
Views
3
Replies
Set up vlan on HP 2530-24G
Posted to: Switches, Hubs, and Modems
11-03-2021 I would like to setup an untagged vlan port on a HP aruba J9776A switch. This is my current config:xxx-switch# show configStartup configuration: 37; J9776A Configuration Editor; Created on releas ...
0
Kudos
10575
Views
3
Replies
Disable AUX port on HPE 5800
Posted to: Comware Based
11-02-2021 Hello,As per auditing requirement, it is recommended to disable AUX port on our HPE 5800 switches. 1. How do I disable the aux port?2. Can I access the switch using console after disabling a ...
0
Kudos
3751
Views
6
Replies
LLDP Rest API not returning all data
Posted to: HPE Aruba Networking & ProVision-based
11-01-2021 WB.16.10.0017, HP J9729A 2920-48G-POE+ Switch but also observed on other mothels and firmware.When I run a "show lldp info remote-device 36-37" on the cli I get output from 2 devices (more l ...
0
Kudos
1845
Views
3
Replies