Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1866117
Members
1537
Online
110490
Solutions
Latest Articles and Discussions
HPE Router - IP addressing
Posted to: LAN Routing
10-28-2021 My question pertains to active active or active passive firewalls and or servers.Take for example a Cisco router. Each physical interface is programed with a unique IP address. That p ...
0
Kudos
1696
Views
3
Replies
No Internet after configuring vlan
Posted to: HPE Aruba Networking & ProVision-based
10-28-2021 Hi,I configured DHCP Server on HP Switch 5412Rzl2 and enabled it for a VLAN using the commands mentioned below. I need to use this VLAN for WiFi.dhcp-server pool "WiFi"default-router "192.168.56. ...
0
Kudos
3457
Views
4
Replies
HPE 1920S cant get routing to work :(
Posted to: Web and Unmanaged
10-28-2021 Hi there!I read a lot of tuts and howtos, but i cant get routing to work.I enabled global routing, i created two vlans.101 - IP 192.168.1.1 / 255.255.255.0 with a 192.168.1.0/24 network behind201 ...
0
Kudos
2701
Views
6
Replies
3810m Flex Module
Posted to: HPE Aruba Networking & ProVision-based
10-27-2021 Is it safe/correct procedure to install a flex module in a 3810m switch while it is powered on? Or must it be powered off?I have a 4-port 10Gbps flex-module that I need to install in a 3810 ...
0
Kudos
1905
Views
1
Reply
OID for 3COM BASELINE SWITCH 2426-PWR PLUS
Posted to: Comware Based
10-27-2021 Hi All,I've a 3COM BASELINE SWITCH 2426-PWR PLUS.How I can retrieve the OID to enable/disable (on/off) POE on a port?Thank you!
0
Kudos
1709
Views
1
Reply
HPE 1950 : Problem with VLAN
Posted to: Web and Unmanaged
10-27-2021 HelloI get Problem configuring VLAN on a 3-switches stack of 1950. The switch with problem is called SW140 in this discussion, and this vlan is working perfectly on the SW149.here my setup: [SW14 ...
0
Kudos
1924
Views
4
Replies
