Operating System - HP-UX
1833801 Members
2546 Online
110063 Solutions
New Discussion

Re: 1 node restarted automatically

 
SOLVED
Go to solution
Chauhan Amit
Respected Contributor

Re: 1 node restarted automatically

Hi Carles,

Checked the GSP Log Entry

DATE: 05/08/2006 TIME: 09:17:39
ALERT LEVEL: 3 = System blocked waiting for operator input
11 = Timestamp 05/08/2006 09:17:39

Main thing to note here is the timestamp it shows is in GMT , so you have to apply correction to check the Local time.

There is no error reported , above is general message after the reboot. It says it is waiting for the entry to acknowledge by the user . So there is absolutely nothing to worry about , there is no hardware fault. And I Believe your Fault LED might also have been gone after checking this message.

So continue with your work happily :) , there is nothing to be worried of.

-Amit

If you are not a part of solution , then you are a part of problem
Carles Viaplana
Valued Contributor

Re: 1 node restarted automatically

Hi all,

We checked all available logs in an HP-UX system and we haven't found nothing so we can see:

- it seems node2 requests node restarts
- There isn't any HW issue

Thanks to all for your help.

And don't worry. If system restarts again (I don't hope so!) I will inform you! ;)

Regards,

Carles