HPE Community
Operating System - HP-UX
1848284 Members
5704 Online
104024 Solutions
New Discussion

A4800A scsi adapter

 
Paul T. Cardullo_1
Occasional Advisor

‎08-01-2006 02:55 AM

‎08-01-2006 02:55 AM

A4800A scsi adapter

Can any one tell me if the A4800A single end scsi adapter will work with hp-ux 11.0 and if so is there any additional driver needed.

IOSCAN see the carc, but does not recognize anything connected to it

Thanks
0 Kudos
Reply
4 REPLIES 4
Patrick Wallek
Honored Contributor

‎08-01-2006 02:57 AM

‎08-01-2006 02:57 AM

Re: A4800A scsi adapter

What does 'ioscan' show? Is it "CLAIMED" or "UNCLAIMED"? If "UNCLAIMED" then you definitely need a driver.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎08-01-2006 03:44 AM

‎08-01-2006 03:44 AM

Re: A4800A scsi adapter

You need a proper termination at the end of the bus.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎08-01-2006 04:02 AM

‎08-01-2006 04:02 AM

Re: A4800A scsi adapter

more info:

http://docs.hp.com/en/A3725-96031/ch02s06.html

*each* end must be terminated:

http://docs.hp.com/en/A3725-96031/ch01s01.html#bbadhchh

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Andrew Rutter
Honored Contributor

‎08-01-2006 05:13 AM

‎08-01-2006 05:13 AM

Re: A4800A scsi adapter

hi paul,

The A4800A scsi card is not SE scsi! that is why it will not see anything attached.

The A4800A is a FWD scsi adapter and must have High Voltage Differential devices connected.

Andy
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.