auto reboot while install 11iv2

[younglovezhenzhen]

Hi, all
I want to reinstall my hp machine with 11iv2, but everytime I boot from DVD till to select install or recover system, it always auto select the system reboot option.
I use WIN2000 to get to the console with vt100 term.
Is there anything I miss?
Can anyone meet this problem before?

Here is the reboot message:


Welcome to the HP-UX installation/recovery process!

Use the key to navigate between fields, and the arrow keys
within fields. Use the key to select an item.
Use the or to pop-up a choices list. If the
menus are not clear, select the "Help" item for more informati+[ Scan Again ]
| Disks: 5 ( 100.2GB)| Floppies: 0 | LAN cards: 2 |
| CD/DVDs: 1 | Tapes: 0 | Memory: 16353Mb |
| Graphics Ports: 0 | IO Buses: 15 | CPUs: 4 |[ H/W Details
nwnstall HP-UX




NOTE: System rebooting...
Shutdown at 12:31 (in 0 minutes)
System shutdown time has arrived
B
sync'ing disks (0 buffers to flush):
0 buffers not flushed

[sujit kumar singh]

hi

Are you able to see and select Install HP-UX?
or have you Selected Rebbot option by mistake.
Regards
sujit

[F Verschuren]

you can try a hp term some old models have a error that hp term is the only term where you can use your console form...

ps please post you model...

[sujit kumar singh]

Hi

Can you see by using putty.

Regards
sujit

[Avinash20]

http://www.bga.org/~lessem/psyc5112/usail/installation/hp/hp-install.html

I believe you are selecting "Cancel and Reboot"
as said by Sujit

[Javed Khan_1]

Hi,

Check your firmware version with 11.23 firmware matrix.

Regards,
Javed Khan

[younglovezhenzhen]

I swear I have not press any key, so I believe I didn't select the Reboot option by a mistake.

There is something strange that it can't display all the install message. But I don't known why.

I have try it more than 10 times. I almost get crazy now. T_T

[younglovezhenzhen]

Problem is solved finally by using the MP LAN port to reinstall.