backup using fbackup command

[badrul]

i using this syntax .....
#fbackup -v -i /ex2/liveBackup/Tape -c /etc/sam/br/fbackup_config -f /dev/rmt/1m

the data about 95GB to backup
the time 8 hours still not finished.

it's i a true time or maybe have a problem

while the fbackup start the message warning is'unable to read header volume 1'

[Sridhar Bhaskarla]

Hi,

Do you see any activity on the tape?. If there are too many small files, then it may take a while. Do not worry about the warning. It tells you that this tape was not previously used for fbackup.

-Sri