BCH BOOT

[Mousa55]

HI
How to boot npar and vpar to BCH mode?

[Matti_Kurkela]

nPar:
Like a regular, non-partitioned HP-UX. Reboot/power-on the system, watch the console of that particular nPar and press any key within the 10 second delay to interrupt the boot sequence when prompted.

vPar:
There is no BCH mode for individual vPars, only for the unit of hardware that runs the vpmon and the set of vPars on top of it. To get the underlying hardware to BCH mode, you must shut down all the vPars in the machine (or nPar, if you're running vPars within nPars) and the vpmon.

If you want to do something to one particular vPar only, read the vPars documentation to find out the proper procedure in vPar environment: it probably involves a command like vparmodify or vparboot.

MK

[Tim Nelson]

In order to get to the BCH menu you have to "RS" the nPar. If the nPar is supporting vPars then the vPars have to come down in order to get the BCH menu.

What are you looking to do ?

[Mario Heredia_1]

In order for this forum to assist please provide the true nature of this post. What are you trying to accomplish? npar boot vpar boot system shutdown? Please clarify.

[Torsten.]

Why you ask almost every question twice?

See
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1160069