[bind 9.2.0] for upgrade..

[김은주]

Hello~ everyzone..

Current version of named is 8.4.6.
I need to upgrade , 9.2.0 ver.

My site is not stop.
So, i worry. And I can't test it.

I saw simple manual. It explaned, swinstall -s 'depot' and it installed , '/usr/contrib/bind'..

I need detailed sequence.

--- my condition --
current named data : /etc/named.data
conf file : /etc/named.conf

swinstall -s /tmp/BIND9.2.0
---------------------

can you help me? --;
thk~..

[Adisuria Wangsadinata_1]

Hi,

You need to remove the old version first. And after that, install the new one.

Please check the url below about 'Installing BIND 9.2.0' :

For HP-UX 11.11 :
http://docs.hp.com/en/5991-0757/ch02s04.html

For HP-UX 11.00 :
http://docs.hp.com/en/5991-0759/ch02s04.html

Other documents (by using keyword : 'BIND 9.2.0') can be found from the url below :

http://www.docs.hp.com

Hope this information can help you.

Cheers,
AW

[Geoff Wild]

How many name servers do you have? (I hope more then 1)...

Upgrade them 1 at a time (start with the secondaries) - you will need an outage on each - IE - they won't be able to respond to DNS querys until they have been upgraded.

As far as install - it should (will - as I have it) be:
/usr/contrib/bind/usr/sbin/named

and a symbolic lin from /usr/sbin/named point to above...

Rgds...Geoff