boot problem

[manal_1]

I have HP-UX11 cluster and one node is down and now i couldn't boot from this server through a console so i don't know what can i do ? i tried boot from isl prompt but the console can not resbonse
thank you

[Torsten.]

I'm not sure about your current status.

Please try to capture your boot attempt console output and post.

[Steven E. Protter]

Shalom manal,

I'll assume you are using service guard clustering.

I will further assume your system has had a boot disk failure.

Thats the best guess based on information provided. You should get the hardware looked at , even if you have to pay by the hour.

Since your boot disk is probably gone, lets hope someone did an Ignite backup so after the hardware is fixed the system is repaired.

SEP

[Prabhat_1]

Hi Manal,

Can you please take the dump of console logs and send us to know the exact status.

Cheers

[Mridul Shrivastava]

Console is not responding ??

How did u connect to console, try connecting via Serial cable if haven't done so.

Try reseting the GSP/MP manually and login again, collect SL/CL logs.

Whats the server model etc.. share as much detail as u can which will enable others to have more idea abt the probable causes.

[manal_1]

Hp unix â tms2 â B.11.00 B9000/899 679481311 16/user license

When I reboot previous kernel
Hpux /stand/vmunix.prev
this message was appeared

Current loading of DIMMS failed the distribution check. This means the memory subsystem may not operate at optimal performance level . to correct , refer to DIMM loading rules and re-distribute DIMMS

[Dennis Handly]

>memory subsystem may not operate at optimal performance level

This seems like a warning, does it boot to user mode?
Do you remember what's different between the prev and the latest kernel?

[Torsten.]

to provide more information, run this in boot menu and post the results:

Main Menu: Enter command or menu > in all