Boot process stays right after memory class setup

[trytosolve]

I am trying to install hp-ux on rx2620 using DVD and it stays right after memory test

AUTO ==> boot :IINSTALL
Seconds left till autoboot - 0
AUTOBOOTING...
AUTO BOOT> boot :IINSTALL
> System Memory = 2041 MB
loading section 0
........................................ (complete)
loading section 1
...... (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
............................................
(complete)
Launching :IINSTALL
SIZE: Text:20176K + Data:2798K + BSS:2496K = Total:25471K

Console is on a Serial Device

Booting kernel...

HP-UX will call firmware in physical-addressing mode

Memory Class Setup
----------------------------------------------
Class Physmem Lockmem Swapmem
----------------------------------------------
System : 2027 MB 2027 MB 2027 MB
Kernel : 2027 MB 2027 MB 2027 MB
User : 1133 MB 985 MB 989 MB

[Torsten.]

Did you check the console settings?

See
http://docs.hp.com/en/AD117-9007A/AD117-9007A.pdf

[Steven E. Protter]

Shalom,

This is likely a firmware issue, the more current the DVD is, the more likely a firmware update will be required.

http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=il&taskId=135&prodTypeId=15351&prodCatId=321933

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=il&taskId=135&prodClassId=-1&prodTypeId=15351&prodSeriesId=447331

SEP

[trytosolve]

Yes i have check the console configuration and it is as per the doc, and also without the OS being up can we upgrade the firmware?

i have the version is
* ROM Version : 01.05
* ROM Date : 11/06/2006
* BMC Version : 05.06

[Torsten.]

Could you please run this command and post the result?

Shell> info all

Firmware updates can be done using a bootable CD_ROM, the ISO image is available on the web.

Where is your console connected?
What exactly is the console device setting?

[trytosolve]

Please find the attachment

[trytosolve]

Please find the info all output

[Torsten.]

A single number can make a big difference!

From your logs:

Product Name: server rx2660


It's not a rx2620!

What is the date of your install media?

[Torsten.]

The console setup guide for this server is

http://docs.hp.com/en/AB419-9005A/AB419-9005A.pdf

You should change the VGA console setting from secondary to not configured.

[trytosolve]

September 2004 DVD, i re-checked even the console settings

[Torsten.]

This is much too old for this server. This release does not support this kind of hardware. You need at least a late 2006 (september) release, but newer will be better.