booting problem

[ratheesh. g]

while booting my D9000 server, there is a message like "nfs server (pid490@/net) not responding". after the aboe mentioned message, there is no improvment on booting. what is the solution????

[Luk Vandenbussche]

Hi,

Check your previous thread

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=969297

Don't forget submitting points now pleas

[RAC_1]

In your case automounter seems to be running. and you have nfs server that is not available.

When you get this message, try cntr c or
Press CTRL + SHIFT + | (pipe)
or Press SHIFT-DEL
CTRL + | (pipe)


If any of the above does not work, boot into single user mode, set automount not to start at boot-time. Edit config file /etc/rc.config.d/nfsconf

[Sivakumar TS]

Hi Ratheesh,

Please check for the availablity of all nfs servers from which this machine mounts filesystems.

was there any change in the network config done in this machine?

With Regards,

Siva