1833779 Members
1901 Online
110063 Solutions
New Discussion

btlan1

 
lastgreatone
Regular Advisor

btlan1

On a k420 I reconfigured the ethernet to 100FD.
PHNE-19020 is installed but not configured.
I ran swconfig to no avail. I get, it is superseded and yet PHNE_22244 is not installed.
Error msg on PHNE_19020 with swconfig is: ...pls merge any changes you made with /usr/newconfig/etc/rc.config.d/hpbasetconf & put the result....any one know of any gotchas on this issue?

2 REPLIES 2
rainer doelker
Valued Contributor

Re: btlan1

Francoise,

I found in the patchtext of the successor patch PHNE_19826:
2. Swverify fails with "ERROR: File "/usr/old/usr/newconfig/etc/rc.config.d/hpbase100conf" missing" after removing patch PHNE_19020.

This looks much like your message, doesn't it? I'd suggest to install the latest Patch and its dependecies on the system: (Maybe you need to use a force option, if PHNE_19020 says it cannot be deinstalled, or something):
System: 800, HPUX: 11.00

PHCO_23876 21.20 MB s700_800 11.00 cumulative SAM/ObAM patch
PHKL_18543 19.43 MB s700_800 11.00 PM/VM/UFS/async/scsi/io/DMAPI/JFS/perf patch
PHKL_20016 0.05 MB s700_800 11.00 2nd CPU not recognized in G70/H70/I70
PHNE_22244 1.81 MB s700_800 11.00 Built-in PCI 100BASE-T patch
PHKL_22589 0.85 MB s700_800 11.00 LOFS, select(), IDS/9000 and umount race fix
PHCO_23651 0.50 MB s700_800 11.00 fsck_vxfs(1M) cumulative patch
PHKL_24116 2.79 MB s700_800 11.00 probe,sysproc,PM,VM,PA-8700 cumulative patch
PHKL_24027 0.62 MB s700_800 11.00 VxFS 3.1 cumulative patch
PHKL_22840 0.09 MB s700_800 11.00 IDS/9000; syscalls related to file/socket
PHNE_23456 3.32 MB s700_800 11.00 cumulative ARPA Transport patch
PHNE_22566 2.93 MB s700_800 11.00 Cumulative STREAMS Patch
PHNE_22962 1.88 MB s700_800 11.00 LAN product cumulative patch

hope this helps on,
rainer
lastgreatone
Regular Advisor

Re: btlan1

I have installed patch PHNE_22244 and notice the /usr/newconfig/etc/rc.config.d/hpbase100conf file provided with this patch is older than the /etc/rc.config.d/hpbase100conf! Do I still proceed with the merge?