Bulding cluster

[Igor Posatskoff]

Hi all!

I need help in building new cluster, I need the information on how to build cluster from the very begining.
Cluster would be on two Itanium servers rx4640.
There is two Disk Storage Systems - model Eva.
There must be installed Continious Access and Business Copy on them. Continious access from Eva1 to Eva2. There will be SAP R/3 Production system on cluster.
All environment connected via Fibre Channel between each other by Cisco switches. I have several SANs, on every host SSSU and Secure Path are installed.
What else software to I need to do that?
And how to install it properly to have fully functioning cluster and in case of getting one of the servers down I would have other working?
thanx

[Ashwani Kashyap]

take a look at the Managing /C service Guard manual at www.docs.hp.com .

This should answer everything regarding building a service guard cluster .

[melvyn burnard]

There is an awful lot to be done here, you may want to consider getting some Conulstancy assistance to ensure this all goes as you would want it.

[Sanjay_6]

Hi Igor,

You should first read this doc before attempting anything.

http://docs.hp.com/hpux/onlinedocs/B3936-90065/B3936-90065.html

Hope this helps.

Regds