Check memory size

[kenlo]

Anybody know how to use command to check the memory slot and size in HP-UX 10.20.


Thanks.
Ken

[Rajeev Shukla]

Hi Ken,
One method is to find out from PDC when the system boots terminate the boot option and do a info on mem.
This will tell you about each slot.

Or if you have online diagnostics loaded you can see to stm. select RAM and do an information. You'll see all slots and memroy here.

Rajeev

[Michael Tully]

Unfortunately 10.20 does not provide the same quality of information hardware, as 11 and 11i. Try utilising either 'cstm' of 'xstm' interactively to get the information. I am fairly sure it does not show the spare slots, only the ones occupied. Here is a similar discussion where the information could be found in the PDC. You can only get to this, from booting your system.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x156bdfe5920fd5118fef0090279cd0f9,00.html

[T G Manikandan]

If you have STM installed then
You can do a

#echo 'selclass qualifier memory;info;wait;Infolog'|cstm

to find out the memory slot distribution

Else

Interrupt the auto boot, and go to information
menu (in).
me -> memory information.
The system must be rebooted for this


Thanks

[Rajeev Shukla]

Try this or else,
echo "selclass qualifier memory;memory;infolog" | cstm

[kenlo]

Hi,

I cannot find "cstm" or "xstm" in HP-UX k400 B.10.20 A 9000/829. Anybody had other suggestion.


Ken

[Rajeev Shukla]

to get the cstm or stm or xstm you'll have to load the online diagnostics that come with the support plus CD.

Otherwise there is no other way then rebooting the machine and find the details from PDC.

Cheers
Rajeev

[Michael Tully]

You can download the latest diagnostics software release from here:

http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=B6191AAE

[surya_3]

To get the physical memory size u can give
# dmesg |grep -i physical
for getting slot details u have to use cstm or xstm

rgds,
spv

[Juan Manuel López]

Use STM to get this information:
1) mstm to run the menu version of STM.
2) select the memory
3) run tools - information - run
You will get the information about the slots you want.

I hope this help you.
Juanna.

Please give us points.

[Juan Manuel López]

Ken you have to give point to us.
I know it is like a game, so everybody wants to get the honours.
Thanks in advance.

Juanma.

take a look to your http://forums.itrc.hp.com/cm/UserProfile/1,,CA447232!1,00.htmlprofile

[Juan Manuel López]

Sorry: the rigth url is:

http://forums.itrc.hp.com/cm/UserProfile/1,,CA447232!1,00.html