HPE Community
Operating System - HP-UX
1844851 Members
2978 Online
110233 Solutions
New Discussion

Clone rp3440 server from K220 server using Ignite

 
RJA
Advisor

‎11-10-2008 07:30 AM

‎11-10-2008 07:30 AM

Clone rp3440 server from K220 server using Ignite

Hi,has anyone successfully cloned a K-class server (11.11) using make_tape_recovery to a rp3440 server? Thanks
0 Kudos
Reply
2 REPLIES 2
Steven E. Protter
Exalted Contributor

‎11-10-2008 07:49 AM

‎11-10-2008 07:49 AM

Re: Clone rp3440 server from K220 server using Ignite

Shalom,

Theoretically this is possible.

In practice the hardware is so different from these two platforms it usually fails.

What you can attempt to do is create an Ignite Golden Image which removes much hardware configuration issues and is supported for replication.

http://docs.hp.com/en/5992-3336/ch09s03.html

I'm not saying its easy, but at least you will get help from HP if you have a software contract.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
Ganesan R
Honored Contributor

‎11-10-2008 08:04 AM

‎11-10-2008 08:04 AM

Re: Clone rp3440 server from K220 server using Ignite

Hi RJA,

Prior to taking the image install the latest hardware enablement patch bundle. This will enable the new hardwares on the new server.
Best wishes,

Ganesh.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.