Command to capture and inspect network packets

[Rajeesh_1]

What is the command used to
capture and inspect network packets on HP Unix.
On Solaris it's Snoop.
Can anybody help me

Thanks in Advance

[John Poff]

Hi,

I think you are looking for the 'nettl' command.

JP

[Bill McNAMARA_1]

If you're in difficult configuring and viewing nettl logs, use the gui:
nettladm.

Later,
Bill

[A. Clay Stephenson]

One of the best freely available packages is 'ethereal'. It has a nice GUI and very powerful filtering. You can download it from: http://gatekeep.cs.utah.edu/hppd/hpux/Gtk/Applications/ethereal-0.9.4/

Make sure that you get all the dependent packages.

[Anil C. Sedha]

You may use a software called as "tcpdump" which would give you an analysis which would be worthy enough of it.

Believe me, it's very good.

Regards,
Anil

[Anil C. Sedha]

Other option is offcourse.. as other's mention here

nettl

options

nettl [-st]
nettl [-sp]
nettl [-ss [LOG|TRACE|ALL]]
nettl [-l class [class...] -e subsystem [subsystem...]]
nettl [-fm 0|1|2 -c dev_name [dev_name...]]
nettl [-tn kind [kind...] -e subsystem [subsystem...]
[-m pack_size] [-c dev_name [dev_name...]]
[-s port_size] [-tm maxsize] [-f tr_name ]]
nettl [-tf -e subsystem [subsystem...] [-c dev_name
[dev_name...]]]

If it helps. don't forget to assign points

[Patty_4]

I'd go with Bill's suggestion. Sounds like the easiest route.

Patty
http://www.mtnwesttelecom.com