command

[Indrajit Bhagat]

what task are carried out using SD-UX command.

[Mridul Shrivastava]

SD-UX is used to install, configure, verify and remove the software, drivers, patches and applications..

[Raj D.]

Indrajit,

Software Distributor for HP-UX (SD-UX) provides you with a powerful set of tools for centralized HP-UX software management. When connected by a LAN or WAN, each computer running SD-UX can act as a server, allowing its resources to be managed or accessed by other machines, or as a client, managing or using the resources of other machines.

Software Distributor commands are included with the HP-UX operating system and, by default, manage software on a local host only. You can also enable remote operations, which let you install and manage software simultaneously on multiple remote hosts connected to a central controller.


Here is few sd-ux command :
swinstall, swremove, swlist , swcopy , swverify. You can check the manpage for details.

Cheers,
Raj.

[Raj D.]

Also have a look on the below page,

http://docs.hp.com/en/B2355-90754/B2355-90754.pdf

hth,
Raj.

[Raj D.]

Indrajit,

Also check this link:
http://66.34.90.71/ITRCForumsEtiquette/after.html

Enjoy,
cheers,
Raj

[Indrajit Bhagat]

thanks to all of youu