config APA.

[chuanpeng.wang]

There is 4 lan cards in system.
They have configured the APA successfully, then they delete the configuration, and reconfig the APA.

When add the lan2 to the APA, return error message like follow:
the port 2 is already in link Agg.

[Steven E. Protter]

Shalom,

Check /var/adm/syslog/syslog.log for any loss of network card or similar message. Also post the error message, it would be helpful with the diagnosis.

SEP

[A.Vishwanath_2 · Accepted solution]

Please examine the "Ethernet Port" settings on the Network Switch. Make sure that the two ports form a group depending on the type of Aggregation protocol you are using. After this unconfigure the APA & all the entries related to these LAN interfaces. Configure from scratch you should be able to do that. It would also be intresting to know on the type of "Aggregation" protocol you are using in the Ethernet Switch.

[Rashid Hamid]

May be you need to delete all configuration, and create it back from scratch.