HPE Community
Operating System - HP-UX
1846907 Members
4158 Online
110256 Solutions
New Discussion

Controller

 
Trenta Angelo
Contributor

‎12-28-2001 02:58 AM

‎12-28-2001 02:58 AM

Controller

Hi all,

I don't know exactly the controller's function,
and how can I find it,
there is an attachement.

Regards, Angelo
I will work harder, HP-UX is always right
0 Kudos
Reply
2 REPLIES 2
garel
New Member

‎12-28-2001 07:58 AM

‎12-28-2001 07:58 AM

Re: Controller

Hi,

You're right. You have 3 SCSI boards on your server at the following address:
10/1/1/0.7.0 with 1 DAT connected
10/0/15/0.7.0 with 2 disks connected
10/0/14/0.7.0 with 1 CDROM connected
Each SCSI Board or controller has a SCSI address, and it's 7 by default. If it's a Single Ended SCSI board, you can connect 7 devices adresse 0 thru 6.
If it's a Wide SCSI board you can connect 15 devices 0 thru 6 and 8 to 15.
regards
francky
0 Kudos
Reply
Krishna Prasad
Trusted Contributor

‎12-28-2001 08:02 AM

‎12-28-2001 08:02 AM

Re: Controller

Everywhere you see ext_bus is a controller.
Positive Results requires Positive Thinking
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.