Customizing print queue HP 11.11

[RDiaz_1]

I need to setup a ascw print queue with different queue options.  We did have this configured on a AIX system, but that system has been retired.  I have not been able to locate information on how to accomplish this HP-UX. Also if looking to set up the ascw print queue , could it be defaulted to print both sides. 

Here is the AIX command that setup the ascw print queue to allow printing a 132 wide (narrows the font on a normal page):

/usr/lib/lpd/pio/etc/piochpq –q ‘ascw’ -d ‘hp@ptr2654’ –p ‘17’ –s ‘lineprinter’ –q ‘300’ –l ‘80’ –w ‘132’

[Dennis Handly]

How is your printer attached?  Local, remote or networked?

You have limited options for remote.

[RDiaz_1]

It's a network printer.

[Dennis Handly]

You might want to look at these posts by Bill Hassell:

http://h30499.www3.hp.com/t5/System-Administration/network-printing-with-duplex-option/m-p/2942391/highlight/true#M113893

http://h30499.www3.hp.com/t5/System-Administration/Can-I-use-jetdirect-model-script-with-lpadmin-command/m-p/3055524/highlight/true#M137442

http://h30499.www3.hp.com/t5/System-Administration/printer-options/m-p/2985003/highlight/true#M123071

http://h30499.www3.hp.com/t5/System-Administration/model-script-question/m-p/3204759/highlight/true#M167337

http://h30499.www3.hp.com/t5/System-Administration/controling-postscript-printer-from-HP-UX/m-p/3438990/highlight/true#M206987

http://h30499.www3.hp.com/t5/System-Administration/Addqueue-VS-lpadmin/m-p/3927982/highlight/true#M286956

http://h30499.www3.hp.com/t5/System-Administration/Are-lp-o-options-documented-anywhere/m-p/3844055/highlight/true#M273893

http://h30499.www3.hp.com/t5/System-Administration/Laserjet-2015n-UNIX-11-00-Jetadmin/m-p/3878459/highlight/true#M279671

http://h30499.www3.hp.com/t5/System-Administration/rx3600-HPUX-11-31-itanium-Network-Printer-setup/m-p/4635415/highlight/true#M378920

[leewilliam99]

> ...network printer...

Not much to go on. What is the HP model number? Did you create the print queue with sam or hppi?